Product Description

 

Product Description

Merchandise Description

-R Series Helical gearbox
 

Merchandise Functions:
one.Substantial modular design.
2.Integrated casting housing,compact dimension,large loading support, secure transmitting and low sound amount.
three.Perfect oil leakage avoiding can make the excellent sealings and can be utilized in wide range of market.
4.This collection is specific for pug mill.
five.Substantial performance and help save power.
6.Save cost and minimal servicing.

Style Attributes:
one. Compact construction, modular design and style
2. One-stage, two-phase and a few-stage dimensions
3. Can be merged with other sorts of gearboxes (These kinds of as R Series, K Collection, F Series, S Sequence, UDL Collection)

 

Item Parameters

 

one Stage
 

Designs Output Shaft Dia. Enter Shaft Dia. Electrical power(kW) Ratio Max. Torque(Nm)
BRX/BRXF38 20mm 16mm .18~1.one 1.62~4.43 twenty
BRX/BRXF58 20mm 19mm .eighteen~5.five one.3~5.five 70
BRX/BRXF68 25mm 19mm .eighteen~7.five one.4~6.07 a hundred thirty five
BRX/BRXF78 30mm 24mm 1.1~11 1.forty two~8.00 215
BRX/BRXF88 40mm 28mm three~22 1.39~8.65 four hundred
BRX/BRXF98 50mm 38mm five.5~30 1.42~8.23 600
BRX/BRXF108 60mm 42mm 7.5~45 one.forty four~6.sixty three 830
BRX/BRXF128 75mm 55mm 7.5~ninety 1.fifty one~6.two 1110
BRX/BRXF158 90mm 70mm 11~132 one.57~6.2 1680

2-3Stage
 

Types Output Shaft Dia. Enter Shaft Dia. Power(kW) Ratio Max. Torque(Nm)
BR/BRF18 20mm .eighteen~.75 3.83~74.84 eighty five
BR/BRF28 25mm 16mm .eighteen~three 3.37~one hundred thirty five.09 a hundred thirty
BR/BRF38 25mm 16mm .18~3 three.forty one~134.eighty two two hundred
BR/BRF48 30mm 19mm .18~5.five 3.83~176.88 300
BR/BRF58 35mm 19mm .eighteen~7.5 four.39~186.89 450
BR/BRF68 35mm 19mm .eighteen~7.five 4.29~199.81 600
BR/BRF78 40mm 24mm .18~11 5.21~195.24 820
BR/BRF88 50mm 28mm .fifty five~eighteen.five five.36~246.54 1550
BR/BRF98 60mm 38mm .fifty five~thirty 4.49~289.6 3000
BR/BRF108 70mm 42mm two.2~forty five five.06~249.sixteen 4300
BR/BRF138 90mm 55mm 5.5~fifty five 5.fifty one~222.six 8000
BR/BRF148 110mm 55mm eleven~90 five.00~163.31 13000
BR/BRF168 120mm 70mm 11~a hundred and sixty 8.seventy seven~229.seventy one 18000

 

 

Resources Info Sheet

Housing content

Gray Forged iron

Housing hardness

HBS163~255

Gear material

20CrMnTi alloy steel

Area hardness of gears

HRC58°~62 °

Gear core hardness

HRC33~48

Enter / Output shaft content

40Cr alloy steel

Enter / Output shaft hardness

HRC32~36

Machining precision of gears

precise grinding, 6~5 Grade

Lubricating oil

GB L-CKC220-460, Shell Omala220-460

Heat remedy

tempering, cementiting, quenching, normalizing, etc.

Effectiveness

94%~ninety six% (is dependent on the transmission phase)

Sounds (MAX)

sixty~68dB

Temp. increase (MAX)

40°C

Temp. rise (Oil)(MAX)

50°C

Vibration

≤20µm

Backlash

≤20Arcmin

Model of bearings

China leading brand bearing, HRB/LYC/ZWZ/C&U. Or other makes asked for, SKF, FAG, INA, NSK.

Model of oil seal

NAK — ZheJiang or other makes asked for

 

In depth Photographs

 

Our procedure of creation

Our merchandise line

 

 

Business Profile

 

Business Profile

Bode  was started in 2007, which is located in HangZhou metropolis, ZHangZhoug province. As 1 skilled manufacturer and exporter, we have a lot more than seventeen years’ expertise in R & D of worm reducer, equipment reducer, gearbox , AC motor and relative spare parts. We have manufacturing unit with innovative manufacturing and check products, the robust development of team and creating capability offer you our consumers with high top quality goods. Our products broadly served to numerous industries of Metallurgy, Chemical compounds, lifting, mining, Petroleum, textile, medication, picket etc. Main marketplaces: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to request us any concerns, excellent offer you constantly for you for lengthy phrase business.

FAQ

Q1: Are you trading organization or producer?
A: We are manufacturing unit.

Q2: What kinds of gearbox can you generate for us?
A: Major items of our business: R, S, K, F collection helical-tooth reducer, RV series worm gear reducer,H Series Parallel Shaft Helical Reduction Gear Box

Q3: Can you make as per personalized drawing?
A: Sure, we provide personalized services for consumers.

This autumn: Can we purchase 1 pc of each item for good quality testing?
A: Of course, we are happy to accept trial order for quality testing.

Q5: What data shall we give ahead of placing a acquire get?
A:  a) Kind of the gearbox, ratio, input and output type, input flange, mounting situation, and motor informationetc.
     b) Housing colour.
     c) Acquire quantity.
     d) Other specific specifications.

Q6: How lengthy is your shipping and delivery time?
A: Typically it is 5-10 days if the goods are in inventory. or it is 15-twenty times if the items are not in stock.

Q7: What is your conditions of payment ?
A: 30% Progress payment by T/T following signing the contract.70% prior to shipping

If you are fascinated in our product, welcome to contact with us.
Our team will do our best to fulfill your need 🙂 
 

 


/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Single-Step

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Models Output Shaft Dia. Input Shaft Dia. Power(kW) Ratio Max. Torque(Nm)
BRX/BRXF38 20mm 16mm 0.18~1.1 1.62~4.43 20
BRX/BRXF58 20mm 19mm 0.18~5.5 1.3~5.5 70
BRX/BRXF68 25mm 19mm 0.18~7.5 1.4~6.07 135
BRX/BRXF78 30mm 24mm 1.1~11 1.42~8.00 215
BRX/BRXF88 40mm 28mm 3~22 1.39~8.65 400
BRX/BRXF98 50mm 38mm 5.5~30 1.42~8.23 600
BRX/BRXF108 60mm 42mm 7.5~45 1.44~6.63 830
BRX/BRXF128 75mm 55mm 7.5~90 1.51~6.2 1110
BRX/BRXF158 90mm 70mm 11~132 1.57~6.2 1680

###

Models Output Shaft Dia. Input Shaft Dia. Power(kW) Ratio Max. Torque(Nm)
BR/BRF18 20mm 0.18~0.75 3.83~74.84 85
BR/BRF28 25mm 16mm 0.18~3 3.37~135.09 130
BR/BRF38 25mm 16mm 0.18~3 3.41~134.82 200
BR/BRF48 30mm 19mm 0.18~5.5 3.83~176.88 300
BR/BRF58 35mm 19mm 0.18~7.5 4.39~186.89 450
BR/BRF68 35mm 19mm 0.18~7.5 4.29~199.81 600
BR/BRF78 40mm 24mm 0.18~11 5.21~195.24 820
BR/BRF88 50mm 28mm 0.55~18.5 5.36~246.54 1550
BR/BRF98 60mm 38mm 0.55~30 4.49~289.6 3000
BR/BRF108 70mm 42mm 2.2~45 5.06~249.16 4300
BR/BRF138 90mm 55mm 5.5~55 5.51~222.6 8000
BR/BRF148 110mm 55mm 11~90 5.00~163.31 13000
BR/BRF168 120mm 70mm 11~160 8.77~229.71 18000

###

Housing material
Grey Cast iron
Housing hardness
HBS163~255
Gear material
20CrMnTi alloy steel
Surface hardness of gears
HRC58°~62 °
Gear core hardness
HRC33~48
Input / Output shaft material
40Cr alloy steel
Input / Output shaft hardness
HRC32~36
Machining precision of gears
accurate grinding, 6~5 Grade
Lubricating oil
GB L-CKC220-460, Shell Omala220-460
Heat treatment
tempering, cementiting, quenching, normalizing, etc.
Efficiency
94%~96% (depends on the transmission stage)
Noise (MAX)
60~68dB
Temp. rise (MAX)
40°C
Temp. rise (Oil)(MAX)
50°C
Vibration
≤20µm
Backlash
≤20Arcmin
Brand of bearings
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal
NAK — Taiwan or other brands requested

/ Piece
|
1 Piece

(Min. Order)

###

Application: Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Single-Step

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Models Output Shaft Dia. Input Shaft Dia. Power(kW) Ratio Max. Torque(Nm)
BRX/BRXF38 20mm 16mm 0.18~1.1 1.62~4.43 20
BRX/BRXF58 20mm 19mm 0.18~5.5 1.3~5.5 70
BRX/BRXF68 25mm 19mm 0.18~7.5 1.4~6.07 135
BRX/BRXF78 30mm 24mm 1.1~11 1.42~8.00 215
BRX/BRXF88 40mm 28mm 3~22 1.39~8.65 400
BRX/BRXF98 50mm 38mm 5.5~30 1.42~8.23 600
BRX/BRXF108 60mm 42mm 7.5~45 1.44~6.63 830
BRX/BRXF128 75mm 55mm 7.5~90 1.51~6.2 1110
BRX/BRXF158 90mm 70mm 11~132 1.57~6.2 1680

###

Models Output Shaft Dia. Input Shaft Dia. Power(kW) Ratio Max. Torque(Nm)
BR/BRF18 20mm 0.18~0.75 3.83~74.84 85
BR/BRF28 25mm 16mm 0.18~3 3.37~135.09 130
BR/BRF38 25mm 16mm 0.18~3 3.41~134.82 200
BR/BRF48 30mm 19mm 0.18~5.5 3.83~176.88 300
BR/BRF58 35mm 19mm 0.18~7.5 4.39~186.89 450
BR/BRF68 35mm 19mm 0.18~7.5 4.29~199.81 600
BR/BRF78 40mm 24mm 0.18~11 5.21~195.24 820
BR/BRF88 50mm 28mm 0.55~18.5 5.36~246.54 1550
BR/BRF98 60mm 38mm 0.55~30 4.49~289.6 3000
BR/BRF108 70mm 42mm 2.2~45 5.06~249.16 4300
BR/BRF138 90mm 55mm 5.5~55 5.51~222.6 8000
BR/BRF148 110mm 55mm 11~90 5.00~163.31 13000
BR/BRF168 120mm 70mm 11~160 8.77~229.71 18000

###

Housing material
Grey Cast iron
Housing hardness
HBS163~255
Gear material
20CrMnTi alloy steel
Surface hardness of gears
HRC58°~62 °
Gear core hardness
HRC33~48
Input / Output shaft material
40Cr alloy steel
Input / Output shaft hardness
HRC32~36
Machining precision of gears
accurate grinding, 6~5 Grade
Lubricating oil
GB L-CKC220-460, Shell Omala220-460
Heat treatment
tempering, cementiting, quenching, normalizing, etc.
Efficiency
94%~96% (depends on the transmission stage)
Noise (MAX)
60~68dB
Temp. rise (MAX)
40°C
Temp. rise (Oil)(MAX)
50°C
Vibration
≤20µm
Backlash
≤20Arcmin
Brand of bearings
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal
NAK — Taiwan or other brands requested

Worm reducer gearbox

Worm reducer gearboxes are commonly used to reduce the Agknx produced by a rotating shaft. They can achieve reduction ratios of five to sixty. In contrast, a single-stage hypoid gear can achieve up to a 120:1 reduction ratio. For further reduction, another type of gearing is used. So, a single stage worm reducer gearbox cannot achieve higher ratios than these.<brworm reducer

Mechanics

A worm reducer gearbox is an auxiliary mechanical device that uses worms to reduce the size of a rotating shaft. These worms have a range of tooth forms. One form is a line weave twist surface. Another is a trapezoid based on a central cross section. The trapezoid can be perpendicular to the tooth cross section, or it can be normal to the root cross section. Other forms include involute helicoids and convolute worms, which use a straight line intersecting the involute generating line.
Worm gears are lubricated with a special lubricant. Because worm gears are complex, it’s important to use the correct lubricant. Worm gear manufacturers provide approved lubricants for their gears. Using unapproved gear oil can damage your reducer gearbox’s efficiency. The right lubricant depends on several factors, including load, speed, duty cycle, and expected operating temperatures.
The efficiency of a worm gear reducer gearbox depends on several factors, including losses at gear mesh, losses in the bearings, and windage in the oil seal lip. In addition, the worm gear reducer gearbox’s efficiency varies with ambient temperature and operating temperature. The worm gear reducer gearbox’s efficiency can also vary with the ratio of the load. Moreover, worm gear reducer gearboxes are subject to break-in.
Worm gear reducer gearboxes are used in many different applications. They are typically used in small electric motors, but they’re also used in conveyor systems, presses, elevators, and mining applications. Worm gears are also commonly found in stringed musical instruments.
Worm gears have excellent reduction ratios and high Agknx multiplication, and they’re often used as speed reducer gearboxes in low to medium-speed applications. However, the efficiency of worm gear reducer gearboxes decreases with increasing ratios.

Sizes

Worm reducer gearboxes come in different sizes and tooth shapes. While the tooth shape of one worm is similar to the other, different worms are designed to carry a different amount of load. For example, a circular arc worm may have a different tooth shape than one with a secondary curve. Worm gears can also be adjusted for backlash. The backlash is the difference between the advancing and receding arc.
There are two sizes of worm reducer gearboxes available from Agknx Transmission. The SW-1 and SW-5 models offer ratios of 3.5:1 to 60:1 and 5:1 to 100:1 respectively. The size of the worm reducer gearbox is determined by the required gear ratio.
Worm gears have different thread counts. One is based on the central cross-section of the worm, and the other is on the right. Worm gears can have either a single or double thread. Single-threaded gears will reduce speed by 50 percent, while double-threaded gears will reduce speed by 25 percent.
Worm gear reducer gearboxes are lightweight and highly reliable. They can accommodate a variety of NEMA input flanges and hollow output bore sizes. Worm reducer gearboxes can be found at 6 regional warehouses, with prepaid freight. To make a purchasing decision, you should consider the horsepower and Agknx requirements of your specific application.
worm reducer

Applications

The Worm reducer gearbox market is a global business that is dominated by the North American and European regions. The report provides in-depth information on the market trends, key challenges, and opportunities. It also examines the current state of the industry and projects future market growth. The report is organized into segments based on product type, major geographical regions, and application. It also presents statistics and key data about the market.
Worm gear reducer gearboxes have many applications. They can be used to increase the speed of convey belts. They also help reduce noise. Worm gears have many teeth that touch the gear mesh, which makes them quieter. Moreover, the worm gears require only a single stage reducer gearbox, reducing the number of moving parts in the system.
The worm gear has long life and is suitable for different industries. It is a perfect choice for elevators and other applications that need fast stopping and braking. Its compact size and ability to hold a load make it suitable for these applications. It also prevents the load from free-falling as a result of a sudden braking. Worm gears can also be used in heavy-duty machinery such as rock crushers.
Worm gears are similar to ordinary gears except that they transfer motion at a 90-degree angle. As a result, the worm gears are extremely quiet, making them a suitable option for noise sensitive applications. They are also excellent for low-voltage applications, where the noise is critical.
Worm gears are ideal for applications with space restrictions, because they require fewer gear sets. The worm gears also allow for a smaller gearbox size. Consequently, they are the perfect choice for machines that are space-constrained, such as conveyors and packaging equipment.

Cost

The lifespan of a worm gear reducer gearbox is comparable to other gear reducer gearboxes. Worm gears have a long history of innovation and use in various industries, from shipbuilding to automobile manufacturing. Today, these gear reducer gearboxes are still popular with engineers. However, there are some things to keep in mind before buying one.
In the first place, a worm reducer gearbox needs to be affordable. Generally, a worm reducer gearbox costs about $120. The price varies with the brand name and features. Some products are more expensive than others, so be sure to shop around for the best price. In addition, it is important to consider the quality and design of the worm reducer gearbox before making a purchase.
Worm gear manufacturers have made significant advancements in materials, design and manufacturing. These advancements, along with the use of advanced lubricants, have resulted in significant increases in efficiency. For example, double enveloping worm gear reducer gearboxes have improved efficiency by three to eight percentage points. This improvement was achieved through rigorous testing of manufacturing processes and materials. With these improvements, worm gear reducer gearboxes have become more desirable in today’s market.
Worm reducer gearboxes are extremely versatile and reliable, and are available in a variety of sizes. Domestic manufacturers usually stock a large selection of reducer gearboxes, and are often able to ship them the same day you place your order. Most major domestic worm gear reducer gearbox manufacturers also share some critical mounting dimensions, such as the output shaft diameter, the mounting hole location, and the overall reducer gearbox housing height. Most manufacturers also offer standardized gear ratios. Some manufacturers have also improved gear design and added synthetic lubricants for better performance.
In addition, different tooth shapes of worms can increase their load carrying capacity. They can be used on secondary curves and circular arc cross sections. Moreover, the pitch point defines the boundary of the cross section. The mesh on the receding arc is smoother than that of the advancing arc. However, in the case of negative shifting, most of the mesh is on the receding arc.
worm reducer

Self-locking function

A worm reducer gearbox has a self-locking function. When a worm is fitted with all of its addendum teeth, the total number of teeth in the system should be greater than 40. This self-locking function is achieved through the worm’s rack and pinion mechanism. The worm’s self-locking feature can prevent the load from being dropped and is useful for many applications.
The self-locking function of a worm reducer gearbox is possible for two main reasons. First of all, a worm reducer gearbox uses two or more gears. One gear is placed at the input, and the other gear runs the output shaft. This mechanism produces a torque, which is transmitted to a spur gear.
Worm reducer gearboxes can be used in a variety of industrial applications. Because of their self-locking function, they are useful for preventing back-driving. They are also helpful for lifting and holding loads. Their self-locking mechanism allows for a large gear reduction ratio without increasing the size of a gear box.
Self-locking gears can be used to prevent back-driving and inertial driving. This is useful for many industries and can prevent backdriving. However, one major disadvantage of self-locking gears is their sensitivity to operating conditions. Lubrication, vibration, and misalignment can affect their reliability.
Embodiments of the invention provide a self-locking mechanism that prevents back-driving but allows forward-driving. The self-locking mechanism may comprise first and second ratchet cams disposed about a gear member. A releasable coupling member may be interposed between the gear member and the ratchet cam. This facilitates selective coupling and decoupling.
The worm reducer gearbox has several advantages. Its compact design is ideal for many mechanical transmission systems. It also provides greater load capacity than a cross-axis helical gear mechanism.

China Helical Gear Foot Mounted Reduction Gearbox 1: 40 Ratio Gearbox     compact worm gearboxChina Helical Gear Foot Mounted Reduction Gearbox 1: 40 Ratio Gearbox     compact worm gearbox
editor by CX 2023-04-14