- Place of Origin:
- Brand Name:
- Model Number:
PAD 2002 hospital door
- Surface Finishing:
- Door Material:
- Open Style:
- Motor type:
DC brushless, worm geared, Hall decoder
- Automatic doors supplier:
- 12-way couplers:
resist signal interferences, avoid short circuit
- Wide voltage range:
- Digitalized parameters:
can be revised easily
- onnection board:
rich ports for connecting accessories
- sealed door:
- Modularized design:
makes installation be simple
- Test approved:
1 million times
- Operating style:
intelligent single motor driving
Packaging & Delivery
- Selling Units:
- Single item
- Single package size:
- 54X32X22 cm
- Single gross weight:
- 40.0 kg
- Package Type:
- 540*300*220mm for kit;
4250*240*230mm for track.
HS code: 850131000
Quantity(Set) 1 – 1 >1 Est. Time(days) 15 To be negotiated
HERMETICALLY SEALED DOORS
To maintain sterility & the correct air pressure in the room,all doors into & out should be sliding, hermetically sealing type.
The doors should meet thefollowing specifications:
Doors should be wired to the current IEE regulations & BS7971standard.
Motorshould be DC 24V 70W brushless DC motor.
Noice level of movement should not be more than 60 decibel.
controller should be microprocessor based.
Power efficiency should be made up of single piece extruded aluminium.
Environment temperature should be -20 degree C to +55degree C .
starting time should be able to regulate from 0.5 second to 23 seconds & starting speed should be 600mm per second.
Electrical safety codes for high & low voltage system.
Design should meet HTM 2020/2021 standards.
The doorframe should be made of high quality anodize aluminium & the door panel should be made of stainless steel (304) that can withstand high abrasion. To ensure efficient sealing of the doors frames should be provided.
The door should seal on all four edges in the closed position & should be surface installed tupe.
The track of the door should be constructed with high quality door lock with aluminium extrusion, fixed firmly to the walls.
Nylon runner guides should be fixed to the door in such a way that they do not obstruct trolley movement through the door.
The door frames should be edge with an aluminium extrusion & with concealed fixings that are adjustable during installation to ensure that a 100% hermetic seal is achieved.
Vision panels, 300 x 300mm should be provided in the doors.
The door controller should be sensing overload condition & in overload case the door should be automatically stop & reverse the direction of travel.
The controller should be capable of sensing either by elbow switches/foot switches, radar switch(touch less sensor) Means we need 2 sensors.All doors should be able to be operated easily manually in the event of failure of the power supply or the automation unit.
The materials , surface finish,and foam can be customized.
Our Advantages and why choose us?
1 we are factory: our add: No.2439 Gaoshi Road, Jiading District, Shanghai, China.
2 we are in automatic doors for more than 15 years.
3 CE, ISO9001 certificates approved.
4 OEM, ODM is available.
5 Special design of automatic door is available.
6 we have more than 10 patents on automatic doors.
7 we have more than 10 years on the electrisity and powder stabilizer.
8 we have strong after-sale service team best service for you.
9 we have technician from Italy, and other technicians from some Chinese famous universities.
10 fast lead time.
Packaging & Shipping
Check below for more information on placing an order :
2.Confirm the price, lead time, payment term etc.
3.oursales send the Proforma Invoice with our seal.
4.Customer make the payment for deposit and send us Bank receipt.
5.Initial Production Stage-Inform the clients that we have got the payment,And will make the samples according to your request, send you photos or Samples to get your approval. After approval, we inform that we will arrange the production & inform the estimated time.
6.Middle Production-send photos to show the production line which you can see your products in . Confirm the estimated delivery time again.
7. End Production-Mass production products photos and samples will send to you for approval. You can also arrange the third party Inspection .
8. Clients make payment for balance and Ship the goods, Inform the tracking number and check the status for clients.
9. Order can be say “finish” when you receive the goods and satisfy with them .
10. Feedback toour about Quality , Service, Market Feedback & Suggestion. And we can do better .