Common Description
Consisting of a pressure balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this energy unit is made to operate material dealing with tools. The lowering movement is achived through the solenoid valve with all the lowering velocity managed by an adjustable needle valve. The left and correct functions are outfitted having a dual pilot operated test valve and cross-over relief valves.
Remark: Please talk to our revenue engineer for your various pump displacement, motor power or tank capacity.
Particular Notes
one. This power unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
two. Clean every one of the hydraulic parts concerned before installation of the electrical power unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst, which should also be clean and free of impurities.N46 hydraulic oil is advisable.
four. This power unit must be mounted horizontal.
5. Check the oil degree from the tank following the initial start off in the energy unit.
6. Oil changing is required just after the initial 100 operation hours, afterwards when each and every 3000 hours.